Seagate Medalist Pro 2160N Manuel d'utilisateur Page 35

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 68
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 34
Storage Devices Training Module 35
STORAGE DEVICES
tional data security above Level 0, but requires additional hardware to
operate.
Level 4. This level stripes data across several drives at a block level,
with parity stored on one drive. This level also offers some additional
data security above Level 0, as data can be recovered as long as the par-
ity information can be accessed. Level 4 is commonly used on large Þle
servers.
Level 5. This level is similar to Level 4, but parity information is distrib-
uted among all drives. This level is often used in database servers.
Power Computing RAID systems
Power Computing sells preconÞgured RAID systems as an option for
the PowerTower Pro. The system consists of two hard drives, an
Adaptec 2940 PCI card, special high-grade SCSI cable, and Conley¨
SoftRAIDª software. The drives are set up by Power Computing in
either a striped or mirrored conÞguration. A RAID system is normally
sold in addition to, not in place of, the normal hard drive.
The locations of the components are designed to keep the cabling as
short as possible to further improve the speed and reliability of the sys-
tem. The Adaptec 2940 card is installed in the top PCI slot. The two
hard drives are installed in a special cage, known as the RAID rack,
located on the crossbar on the middle of the chassis. A three-head
SCSI cable approximately one foot long connect the devices. The drive
connected to the middle position of the SCSI cable is set to ID 1 and is
unterminated. The drive connected to the end of the SCSI cable is set
to ID 0 and is terminated.
Conley SoftRAID
SoftRAIDis the software application that conÞgures and controls RAID
systems sold by Power Computing. Use SoftRAID to:
¥ Format hard drives
¥ Create striped volumes
¥ Create mirrored volumes
¥ Update disk drivers
SoftRAID is composed of two components: the SoftRAID application,
and a system extension called SoftRAID Monitor. The application is
used for the conÞguration of the RAID system, and does not need to be
Vue de la page 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 67 68

Commentaires sur ces manuels

Pas de commentaire