Seagate ST3500410SV - 500GB 7200RPM Sata Surveillanc Guide d'installation

HD VIDEO NETWORK RECORDER SERIES Quick Installation Guide DN-16114 • DN-16118

7 3. USER INTERFACE 3.1 Local 3.1.1 Device Status Note: The functions shown may vary based on the model or the access user level you use. Key lock

8 3.1.4 Main Menu Right-click anywhere on the screen to show the main menu as follows, and right-click again to exit. QUICK START Click to set the

9 APPENDIX 1 COMPATIBLE USB FLASH DRIVE LIST Please upgrade the firmware to the latest version to ensure the accuracy of the following table. If the

10 APPENDIX 2 COMPATIBLE HARD DISK LIST Please upgrade the firmware of the device to the latest version to ensure the accuracy of the following table

11 APPENDIX 3 HARD DISK INSTALLATION Note: It’s necessary to install a hard disk first before firmware upgrade to ensure the upgrade process works

12 Step3: Fasten the hard disk to the bracket by securing the screws on the bracket. Note: You may find screws in the sales package. CR2032HardDisk

13 Step2: Get a compatible hard disk. With the PCB side facing down, align the hard disk with the hard disk power & sata port, and insert the ha

14 APPENDIX 4 BATTERY REPLACEMENT The time reset after power failure, for example, caused by a power outage, will cause the disorder of the recorded

15 APPENDIX 5 DISK ARRAY COMPATIBLE LIST This NVR series has an eSATA interface built-in for external disk array connection. Here's the compatib

IMPORTANT SAFEGUARD All lead-free products offered by the company comply with the requirements of the European law on the Restriction of Hazardous

MPEG4 Licensing THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (

1 1. HARDWARE OVERVIEW 1.1 Front Panel Note: The functions on the front panel and rear panel may vary, depending on the mode you have. 1) LED indicat

2 1.2 Rear Panel 1) eSATA This port is used to connect a storage device supporting eSATA interface; for instance, a disk array. Note: Please purchas

3 2. CONNECTION 2.1 Camera IP Configurations by LAN Auto mode is to simplify the complicated network settings within three minutes. The connection mo

4 Type 2 Monitorwhich supports HD image displayConnect up to 16 IP devices:RearPanelHigh DefinitionDisplay Inter faceIP cameraLaptopiPhoneiPadAndroid

5 The device will automatically configure the IP address of a camera connected by LAN if:  The connected IP camera is our brand’s IP camera.  Res

6 2.2 Manual Connection Setup Note: SETTING Path: (ADVANCED CONFIG)  CONNECTION. To manually assign the address of your camera connected locally,