Seagate ST3500641AS Manuel d'utilisateur télécharger pdf (Page 11)

Figure 3: Using SeriTek/2SE4 with a drive enclosure that has I-shaped eSATA connectors; both cable

connectors will be identical.

Making the eSATA Connection

Caution: Be sure to connect the cable using the proper orientation to your SeriTek/2SE4

host adapter and external enclosure. It should easily snap into place. Please do not

force the cable connector onto the host adapter and hard drive or peripheral interface.

Remember the male and female connectors must be of the same type for them to fit:

L-shaped female to L-shaped male or eSATA female to eSATA male.

• First check that you are connecting the correct type of connectors to each other

• If your connectors still do not fit, rotate the cable and try again

1. Connect your drive cables, or insert them in an enclosure. If your enclosure is powered

on, a configuration screen will appear. If your enclosure is powered off, power it on, and

you should see the following configuration screen appear.

Figure 4: Mac OS X Configuration Changed screen

Make sure that you make all changes to your storage configuration (inserting/removing

drives) before closing this window.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 25 26

Pas de commentaire

Seagate ST3500641AS Manuel d'utilisateur Page 11