Seagate ST118273WC Guide de l'utilisateur télécharger pdf (Page 63)

HP-UX version 11.00.01 5-1

Configuring Tape Drives 5-

Several kinds of tape drives, having different recording methods and formats, can be

configured to the HP-UX operating system.

On a Continuum Series 400 system, options include:

■ nine-track reel-to-reel tape drive

■ 525 MB QIC cartridge tape

■ 3480 IBM-compatible

■ DDS (DAT) tape drive

On a Continuum Series 600 and 1200 system, options include:

■ 18-track, 3480-media compatible

■ DDS III, 4 mm, 72/144 GB DAT with autoloader, 6 cartridges

■ DDS III, 4 mm, 12/24 GB DAT

■ 1.2 GB QIC tape

■ DDSDAT with autoloader

Despite their differences, any of these tape drives can be configured into the HP-UX

operating system by the same basic procedure:

1. Add the tape device to the system and run the addhardware command.

2. Set the tape drive to a unique address on the SCSI interface bus.

3. Follow the steps documented in this chapter to configure the HP-UX operating

system for the device.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 85 86

Pas de commentaire

Seagate ST118273WC Guide de l'utilisateur Page 63