Seagate ST34572WC Spécifications télécharger pdf (Page 53)

10. Specify the mirror disk as the alternate boot path in nonvolatile memory:

# setboot –a 0/1/1/0.1.0

11. To add a line to /stand/bootconf for the new boot disk, use vi or another text editor as

follows:

# vi /stand/bootconf

l /dev/dsk/c2t1d0s2

where l denotes LVM.

12. Copy the HP service partition(skip this, if you do not have a service partition):

# dd if=/dev/rdsk/c1t0d1s3 of=/dev/rdsk/c2t1d0s3 bs=1024k &

Note : The previous example recommends running the dd command in the background (by

adding & at the end of the command) if you are not sure the dd command will hang when it does

the read. If the dd command is run in the foreground, Ctrl+C stops the read on the disk.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 66 67

Pas de commentaire

Seagate ST34572WC Spécifications Page 53