Seagate Pulsar XT.2 Manuel télécharger pdf (Page 36)

28 Pulsar XT.2 SAS Product Manual, Rev. B

7.4 Power dissipation

400GB models in 6Gb operation

Typical power dissipation under idle conditions in 6Gb operation is 5.92 watts 20.20 BTUs per hour).

To obtain operating power for typical random write operations, refer to the following I/O rate curve (see Figure

4). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5

volt current, +12 volt current, and total watts on the vertical axis. To calculate BTUs per hour, multiply watts by

3.4123.

Figure 4. 400GB (at 6Gb) DC current and power vs. input/output operations per second

200GB models in 6Gb operation

Typical power dissipation under idle conditions in 6Gb operation is 4.04 watts (13.79 BTUs per hour).

To obtain operating power for typical random write operations, refer to the following I/O rate curve (see Figure

5). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5

volt current, +12 volt current, and total watts on the vertical axis. To calculate BTUs per hour, multiply watts by

3.4123.

Figure 5. 200GB (at 6Gb) DC current and power vs. input/output operations per second

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 73 74

Pas de commentaire

Seagate Pulsar XT.2 Manuel Page 36