Seagate ST380013A Fiche technique télécharger pdf (Page 27)

Barracuda 7200.7 Product Manual, Rev. N 19

3.0 Configuring and mounting the drive

This section contains the specifications and instructions for configuring and mounting the drive.

3.1 Handling and static discharge precautions

After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic dis-

charge (ESD) hazards. Observe the following standard handling and static-discharge precautions:

Caution:

• The SeaShell™ replaces electrostatic discharge (ESD) bags. The SeaShell package is a shock-ribbed,

transparent clamshell enclosure that limits a drive’s exposure to ESD and also protects against external

shocks and stresses. The design permits attaching cables, software loading and label/barcode scanning

without removing the drive from the SeaShell. This minimizes handling damage. Keep the drive in the Sea-

Shell package until you are ready for installation.

• Before handling the drive, put on a grounded wrist strap, or ground yourself frequently by touching the metal

chassis of a computer that is plugged into a grounded outlet. Wear a grounded wrist strap throughout the

entire installation procedure.

• Handle the drive by its edges or frame only.

• The drive is extremely fragile—handle it with care. Do not press down on the drive top cover.

• Always rest the drive on a padded, antistatic surface until you mount it in the computer.

• Do not touch the connector pins or the printed circuit board.

• Do not remove the factory-installed labels from the drive or cover them with additional labels. Removal voids

the warranty. Some factory-installed labels contain information needed to service the drive. Other labels are

used to seal out dirt and contamination.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 53 54

Pas de commentaire

Seagate ST380013A Fiche technique Page 27