Seagate ST3500312CS Manuel d'utilisateur télécharger pdf (Page 31)

Pipeline HD.2 Series SATA Product Manual, Rev. E 23

3.4 Drive mounting

You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the

bottom-mounting holes. Refer to Figure 3 for drive mounting dimensions. Follow these important mounting pre-

cautions when mounting the drive:

• Allow a minimum clearance of 0.030 in

ches (0.76mm) around the entire perimeter of the drive for cooling.

• Use only 6-32 UNC mounting screws.

• The screws should be inserted no more than 0.150 inches (3

.81mm) into the bottom or side mounting holes.

• Do not overtighten the mounting screws (maximum torque: 6 inch-lb).

Recommended

case temperature

measurement

location

Figure 3. Mounting dimensions (for 1000GB models)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 49 50

Pas de commentaire

Seagate ST3500312CS Manuel d'utilisateur Page 31