Seagate ST500LM020 Guide de l'utilisateur télécharger pdf (Page 19)

TPM Lifecycle Management | Wave Systems Corp.  2012

ESC 2.9.5 Client Manual

Once these prerequisites are met, and ESC 2.9 is installed, both KSPs are available for usage through

Windows.

Wave TCG Enabled KSP

This is the standard KSP. The usage of a PIN is optional.

Wave TCG-Enabled Strong Authentication KSP

This KSP supports only protected keys, meaning a pin must always be used with the strong

authentication KSP.

1. All Keys created with this KSP are always password protected.

2. This KSP will never store the individual TPM key password in the Wave Password Vault.

4.4. Clearing and Disabling a TPM

TPM hardware state is controlled by the endpoint’s BIOS software. In order to clear, enable/disable, or

activate/deactivate a TPM you must restart the endpoint and press the appropriate key on the keyboard

to enter the endpoint’s BIOS environment. Each computer manufacturer implements this procedure

differently. Consult your computer owner’s manual for the appropriate BIOS environment procedures.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 62 63

Pas de commentaire

Seagate ST500LM020 Guide de l'utilisateur Page 19