Seagate ST31230N/ND Guide d'installation télécharger pdf (Page 196)

14-6 Troubleshooting startup problems

Normal startup sequence

Standard 1.0 Option 11 EC Installation and Maintenance Guide November 1999

To obtain a hard copy of the startup sequence on the

administration terminal’s printer, follow these steps.

Note: If the startup does not proceed as described in the

“startup stages” table, proceed to the “startup problems”

table.

Step Action

1 Restart the system.

Result: The messages appear on the terminal.

2 To turn on automatic printing, press <Ctrl> <w> <p>.

Result: The startup messages begin printing on the

printer, and “Aut” appears at the bottom of the

terminal screen.

3 To turn off automatic printing when you are finished,

press <Ctrl> <w> <p> again.

Result: “Aut” disappears from the bottom of the

terminal screen.

4 Compare the startup printout to the information

presented in the “startup stages” table that follows in

this section.

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 271 272

Pas de commentaire

Seagate ST31230N/ND Guide d'installation Page 196