Seagate ST3300007LW Guide de l'utilisateur télécharger pdf (Page 20)

Using the default values, SCSI Hammer™ will erase all data on all attached drives by writing

zeros (

0x00) to every sector.

Begin the erasure process by pressing the

RIGHT navigation button. SCSI Hammer™

responds with a confirmation question

Pressing the RIGHT navigation button will

confirm and cause SCSI Hammer™ to

initialize the erasure process.

Once initialized, SCSI Hammer™ begins the

erasure process.

Progress is indicated in increments of ten

(10%) percent, as described in Figures 8 and

During or subsequent to an operation, the

UP and DOWN navigation buttons may be

used to scroll between ‘ERASE A’ and ‘ERASE

B’ display pages.

Once completed, SCSI Hammer™ displays

‘D’ in each position and the word ‘Done’

above.

SCSI Hammer™ may be configured to erase data in a way which meets the NIST 800-88

‘purge’ guidelines by selecting ‘Secure Erase’ from the ‘Operations/Erase Drive’ submenu.

SCSI Hammer™ Users Guide

Page 20 of 89

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 88 89

Pas de commentaire

Seagate ST3300007LW Guide de l'utilisateur Page 20