Seagate Medalist 1721 Guide d'installation télécharger pdf (Page 10)

6 Medalist 1721, 1010, Rev. B

Figure 3. Mounting screws

3. You can mount the drive in any orientation. Usually it is

mounted with the circuit board down.

4. Slide the drive carefully into the drive bay. Secure the drive

with four 6-32 UNC mounting screws in either the side-

mounting holes or the bottom-mounting holes. Insert the

screws no more than 0.22 inch (5.58 mm) into the bottom-

mounting holes and no more than 0.20 inch (5.0 mm) into the

side-mounting holes.

Caution. To avoid possible damage to the drive, do not

overtighten the screws or use metric screws.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 41 42

Pas de commentaire

Seagate Medalist 1721 Guide d'installation Page 10