Seagate ST15150N - Barracuda 4.3 GB Hard Drive Manuel d'utilisateur télécharger pdf (Page 34)

TGL Use this key to change selections within most menus.

NUDGE BACK (--) Locates one field back from the current position. Also used for selection

in the "Edit Preset" and "Set Video" Optional Menu selections.

NUDGE FORWARD (++) Locates one field ahead of the current position. Also used for selection

in the "Edit Preset" and "Set Video" Optional Menu selections.

SHUTTLE Click on the button and move the mouse to shuttle in forward or reverse.

The angle, up to +/-90°, controls the shuttle speed, which is displayed on

the second line of the LCD. When the mouse button is released, the

shuttle button will return to its original position (0°)

IN Sets the IN point for segment play. (See Section 4.2.6, "Segment

Definition and Playback").

OUT Sets the OUT point for segment play. (See Section 4.2.6, "Segment

Definition and Playback").

GOTO To locate to a specific frame (field) from the V1 front panel, enter the

time code location numbers from the numeric keypad and press GOTO.

ESC This is the escape key. Press it when you want to exit the menu mode or

abort an operation.

RCL Used to recall segment numbers (See Section 4.2.6, "Segment Definition

and Playback").

SAVE Used to save a segment to a memory location number. (See Section 4.2.6,

"Segment Definition and Playback").

AT/TC Toggles between Absolute Time and Time Code.

REMOTE/LOCAL Toggles between Remote and Local.

Option _RR Holding down the Option (Shift for PC) key of the keyboard and

pressing the RR button allows the V1 to play in reverse at normal speed.

6.4.2 VToolsPro Clips

Clicking on the second tab “CLIPS” will take you to the clip window.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 68 69

Pas de commentaire

Seagate ST15150N - Barracuda 4.3 GB Hard Drive Manuel d'utilisateur Page 34