Seagate ST3500641AS Manuel d'utilisateur télécharger pdf (Page 23)

peripheral. How can I set it to Master or Slave; is there any way to set the

SCSI ID?

Serial ATA hard drives and peripherals are internally configured as Master drives. Only

one drive can be attached to each Serial ATA bus/connector. There is no need to change

settings on either the drive or the controller.

• I have an old Parallel ATA drive which I am trying to use with a Parallel ATA to

Serial ATA converter, but it doesn’t seem to work.

Some older Parallel ATA drives do not comply with current ATA standards. Parallel ATA to

Serial ATA converters cannot recognize such drives.

VI. Product Support

Technical Support

For additional information on how to use SeriTek/2SE4, download the latest firmware updates, or

for technical assistance, please visit us at www.firmtek.com, or email us at

Please provide the following information when contacting us:

• Product model and serial number

• Firmware version (You may use the Apple System Profiler as described in the

troubleshooting section to determine the firmware version. Look for ROM # and Revision #)

• Macintosh model

• Macintosh OS type and version (example: Mac OS X, version 10.4.6)

• Hardware and software installed on your system

• Contact information including daytime telephone number and email address

• A detailed description of the question or problem

1 2 ... 18 19 20 21 22 23 24 25 26

Pas de commentaire

Seagate ST3500641AS Manuel d'utilisateur Page 23